Useful Photo Link

Found a 68 Shelby Convertible for sale on Ebay - a mere $139,995.00 and she's yours!!!

A very nice collection of photos though that might useful to some of you. Especially a shot of the lower reinforcement plate that we have been batting back and forth. This is installed in the same orientation as mine. 

Here's the link. A spectacular car!!!

68 Shelby Convertible pics

What's happening at the robot shop

Hi everyone,

Hope you've all had a great holiday season and found some time to fit in a little garage work. Unfortunately my work has continued to interfere with getting back to SusieQ. Though this has little to do with our  common ground, Mustang restoration - I thought you all might find it a bit interesting.

My company designs and builds mobile robots. Big ones, little ones - in between ones. We also 'robotize' vehicles. Bulldozers, cars, trucks, utility vehicles, lawn mowers, 50 ton land mine destroyers - if it has a gas pedal and steering wheel, we can turn it into a robot. 

But in late October, we landed a job a bit outside our normal scope of work. We hooked up with an ad agency that asked us to design and fabricate a robotic couch for Conan O-Brien's show in New York City. It was an intense 3 week build that had more 21 hr days in it than I cared for but when you are having fun, sleep is typically irrelevant. TBS required the ad agency to produce a 'making of the couch' video as part of the contract. So we were followed around the shop like those guys on Orange County Chopper - which though intense, didn't result in any chairs being thrown through windows or doors being kicked in. Here's a link to the video. I'm the old guy with the grey beard.

 Couch Video

Immediately after this 3 week firestorm, our waterjet arrived and we rolled straight into infrastructure upgrades to support it. Accomplished quite a bit over the Holidays and got the building-in-a-building completed and water/heat/electric plumbed in. Just down to getting the step-up transformer wired in. Here's a shot of the building-in-a-building. The car is actually just behind my back in this photo. Once we get up and cutting, I'm hoping to give her a little time. Until then we have to keep the bills paid.

Interesting leveling scheme

I came across this interesting technique for leveling a car in an unlevel garage.

http://www.mig-welding.co.uk/sills.htm

Using red wine over water due to viscosity differences was a key detail. One of those things you could quickly jury-rigged in your own garage. As everyone is in some stage of panel installation, thought it might be of some use.

rj

Pondering Brake Scoops

Well it has been awhile since I've had anything to post. Between a tight project deadline and moving my business to a new location - there's been little time for SusieQ. I did get her moved to the new location and she seems happy in the new hangar. More space, more light - extra shelf space to spread all the cardboard boxes out.

Big news is that tomorrow, our new waterjet arrives. They sent photos of it today being loaded in Chicago. Should be here tomorrow morning. I'm expecting a day of heavy lifting and toting. Machinery moving is always a tense time. Lots of places for things to go wrong...

But lack of actual work has been replaced with some mental effort. I'm currently in a sort of Catch 22. I can't button up the rear quarter upholstery until I get the window regs back in. And I can't put the window regs in until I decide on what's going on the exterior quarter panel. My car comes with the standard quarter trim with the thin chrome insert. Like many of the chrome items on these cars, they are beginning to look dated. What I saw in the 50's cars as a kid, I'm beginning to see in the 60's cars as an adult. The overall design remains fresh, but the small details begin to age design-wise. I had considered just welding up the trim holes and going with a cleaner look but that's an awful lot of sheet metal expanse w/o any detail - which is why the quarter trim was put there in the first place. BTW, this is the sort of thing Chip Foose is so good at. He has a great eye for detail. He occasionally chops cars up more than I prefer, but his eye for small detail is excellent.

Which leads me to the title of this post - brake scoops. I've always liked the Shelby brake scoops and put a pair on my 67 fstbk. For SusieQ, I'm leaning towards the faux 68 California Special scoops. After trying to win an original pair off Ebay for less than a gazillion dollars I ordered a pair of knock-offs. Which was basically a waste of $60. The ones I ended up with are good for nothing more than skeet practice - 'PULL' - 'BOOM'. No mounting studs on the back and not even close to matching the 1/4 profile. Lesson learned.

I'm thinking then either Tony Branda or Maier Racing if I decide to go with the stock scoops. They both have two studs for good securing. Alternatively there are the Eleanor scoops but for my tastes they are just a tad large - esp for a convertible. Ring Bros have some cool scoops - but again - too over the top for a convertible. What I really want just isn't available. Which means I either make a pair of one-offs from scratch - or I just go with the original style but from a decent vendor. If I make a pair, I'm going to make them out of sheet steel but still leave them as bolt-on. I like the seam detail of a bolt-on rather than filling them in. My only hesitation is the sheet metal forming. Going to need a little profile to the outer surface and I've no experience with hammer/leather shot work. But what can wrong? If I hate them - toss'em and go with stock.

All suggestions / opinions welcomed. Maybe you guys have seen some other alternatives for this area that you like. I'm all ears!!!! Thanks!

rj

Interior / Trunk - 2

Back into the trunk and interior today. Getting ready to move the car to a new location and wanted to button some things up beforehand. Would like to get the gas tank installed so hence the focus on the trunk. Got the trunk speckle-painted last weekend and wanted to touch up the inner wheel wells. It looked like someone threw sand on them before they sealed them with primer during the first restoration. Got the palm sander out and hit what I could - and what I couldn't - got hand sanded. Few hours later, a little primer and she's not looking too bad. Probably re-sand to fill the small stuff and hit it again. Found a can of Plasti-Kote on-line called Ford Candy Apple Red. If the cap color is any indication, it looks close to what I have. For the trunk area it will be good enough.

BEFORE

AFTER

 While the primer was drying, I headed back into the interior. I've been piddling around with the left quarter window for too long. A pile of rust, bent regulators, warped tracks and worn-out bushings. Finally getting to the end of it though. Found a good used regulator on-line and was able to hammer the tracks back into their proper shapes. Sand blasted and powder coated the inner regulator mounting plate this past week. Just needed to POR-15 the inner quarter panel patches and then start into reassembly.

LEFT QUARTER WINDOW

Once I got the POR-15 brushed on, I moved a bit forward and got the front carpet reinstalled over the fresh Dynamat. Threw on the shifter bezel and handle and called it a day. Good progress!

FRONT CARPET REINSTALLED

Parts Identification Help

As I've mentioned, my car came to me in cardboard boxes and coffee cans. With no documentation of the disassembly, I've combed NPD catalogs, shop manuals and slid under cars at car shows trying to identify parts that I couldn't find a home for. I'm finally down to a handful of parts that are still looking for a place to live. I'm posting them here in the hope someone might know what they are and where they go. As a warning, it is quite possible some of these aren't Mustang parts as we gathered up what we could find in the original restorer's garage. If it was on the floor, it went in a can. I've id'ed some of these parts since this photo. I've listed those below along with some additional descriptions. All help appreciated!

1 - front bumper-to-fender brackets

2 - original washer/thin sheet metal nuts that retain the brake drums

3 - front fender shims

4 - no idea - it's made of pot metal - about 1/8" thick
5 - no idea - thin sheet metal nut
6 - deck lid trim molding clips
7 - no idea - sheet metal hat with swagged stud - sheet metal nut
8 - no idea - hard plastic - look like some sort of blade seal
9 - these should be easy as there are 9 of them but I've yet to figure out where they go. Slight gold plating - 1/4-20 - these feel like seat bolts, heater box bolts or something in the taillight area. But I don't seem to be missing any fasteners in those areas. Five of them are 1 1/2" long, three are 2" long.

un-numbered photo - rear shock bushings (thanks to JoyRider for the id!!!) these came in a plastic bag attached to the rear seat springs.

Interior / Trunk

After missing a few weekends due to bike racing, I got back to the car Saturday for a couple hours. Finished up the Dynamat installation. There are still lots of places it could be installed but decided enough was enough. I don't plan one of those head-banging bass systems so there's no need to completely sound-proof the car - esp with it being a convertible.

With the Dynamat wrapped up, I headed back to the trunk area. I've been wanting to get the gas tank back in but was waiting until I speckle-painted the trunk area. Bought some white/gray speckle paint from Eastwood that I've used before on my 67. I like the looks of it and it goes a long way in hiding the myriad of small  bumps/dents that are inevitably found in a 40 year old car trunk. After 2 coats of paint, I let it dry overnight and hit it with 3 coats of Diamond Clear Satin on Sunday.

All that's left before dropping in the tank is touching up the body paint on the inner wheel wells and rear bulkhead. Found some Ford Candy Apple Red by Plasti-Kote on the internet tonight and ordered a can. A couple squirts and I should be nearly finished in the trunk. Just a few stainless steel fasteners here and there and running the new taillight harness.

Susie dropped off the rear seats at the upholstery shop last Thurs. I had previously sand blasted and painted the seat frames so they have been ready for upholstery for awhile now. Just needed to get them to the shop. Front seats are already done. Now that the Dynamat is completed, I can get the carpet installed, followed in short order by the front and rear seats. Someplace to sit again in the car other than the floor!!!!!